Freedom9 freeGuard 100, Руководство по интерфейсу командной строки

Страница: 161 / 310

154
show router rip
Command History
Related Commands
•
config router access-list
•
config router key-chain
•
config router prefix-list
•
config router route-map
•
execute router restart-graceful
•
get router info protocols
•
get router info rip
•
get router info routing_table
8.11 route-map
Use this command to add, edit, or delete route maps.
Route maps are a specialized form of filter. Route maps are similar to access lists, but have enhanced
matching criteria, and in addition to permit or deny actions can be configured to make changes as
defined by set statements.
The freeGuard 100 attempts to match a packet against the rules in a route map starting at the top of
the list. If it finds a match it makes the changes defined in the set statements and then takes the action
specified for the rule. If no match is found in the route map the default action is deny. If no match
statements are defined in a rule, the default action is to match everything. If multiple match statements
are defined in a rule, all the match statements must match before the set statements can be used.
For a route map to take effect it must be called by another freeGuard 100 routing feature such as RIP.
Command syntax pattern
Add, edit or delete a route map with the specified name.
config router route-map
edit <name_str>
end
config router route-map
delete <name_str>
end
get router route-map [<name_str>]
show router route-map [<name_str>]
The configrouter route-map command has 1 subcommand.
config rule