Freedom9 freeGuard 100, Руководство по интерфейсу командной строки

Страница: 146 / 310

freeGuard 100 CLI User Manual
139
This example shows how to display the list of policy based routes.
get router policy
This example shows how to display the settings for routing policy 1.
get router policy 1
This example shows how to display the configuration for the router policy command.
show router policy
This example shows how to display the configuration for routing policy 1.
show router policy 1
Command History
Related Commands
•
config router static
8.9 prefix-list
Use this command to add, edit, or delete prefix lists.
A prefix list is an enhanced version of an access list that allows you to control the length of the prefix
netmask.
Each rule in a prefix list consists of a prefix (IP address and netmask), the action to take for this prefix
(permit or deny), and maximum and minimum prefix length settings.
The freeGuard 100 attempts to match a packet against the rules in a prefix list starting at the top of the
list. If it finds a match for the prefix it takes the action specified for that prefix. If no match is found the
default action is deny.
For a prefix list to take effect it must be called by another freeGuard 100 routing feature such as RIP
or OSPF.
Command syntax pattern
Add, edit or delete a prefix list with the specified name. An access list and a prefix list cannot have the
same name.
config router prefix-list
edit <name_str>
end
config router prefix-list
delete <name_str>
end