Freedom9 freeGuard 100, Руководство по интерфейсу командной строки

Страница: 152 / 310

freeGuard 100 CLI User Manual
145
show router rip
distance command keywords and variables Example
Keywords & Variables Description Default
access-list <name_str> Enter the name of an access list. The distances
associated with the routes in the access list will be
modified. To create an access list, see “config
router access-list” on page 139".
null
distance
<distance_integer> Enter a number from 1 to 255, to set the
administrative distance. 0
prefix
<address_ipv4mask> Optionally enter a prefix to apply theadministrative
distance to. 0.0.0.0 0.0.0.0
This example shows how to change the administrative distance to 10.
config router rip
config distance
edit 1
set distance 10
end
end
This example shows how to display the RIP settings.
get router rip
This example shows how to display the RIP configuration.
show router rip
config distribute-list
Access the config distribute-list subcommand using the config router rip command.
Use this command to filter incoming or outgoing updates using an access list or a prefix list. If you do
not specify an interface the filter will be applied to all interfaces. You must configure the access list or
prefix list that you want the distribute list to use before you configure the distribute list. For more
information on configuring access lists and prefix lists, see “config router access-list” and “config router
prefix-list” .
Command syntax pattern
config distribute-list
edit <id_integer>