Freedom9 freeGuard 100, Руководство по интерфейсу командной строки

Страница: 15 / 310

8
2.3 CLI Structure
This section describes:
•
CLI command organization
•
Example command sequences
CLI command organization
The freeGuard 100 CLI consists of the following command branches:
•
config branch
•
get branch
•
show branch
•
execute branch
•
diagnose branch
config branch
The config branch is organized into configuration shells. You can complete and save the configuration
within each shell for that shell, or you can leave the shell without saving the configuration. You can
only use the configuration commands for the shell that you are working in. To use the configuration
commands for another shell you must leave the shell you are working in and enter the other shell.
The following navigation and configuration commands are available in the config branch.
config Navigate to a shell. For example, type
config system admin
and press Enter to access
the shell to add or edit administrator accounts.
end Save the changes you have made in the current shell and leave the shell. Every
config
command must be paired with an
end
command. The
end
command is also used to save
set
command changes and leave the shell.
edit Add an entry to the freeGuard 100 configuration or edit an existing entry. For example in the
config system admin
shell:
•
type edit admin and press Enter to edit the settings for the default admin administrator
account.
•
type edit newadmin and press Enter to create a new administrator account with the
name newadmin and to edit the default settings for the new administrator account.
When you add a new entry using the
edit
command, the message
new entry
<‘variable’> added
is displayed.
purge Remove all entries configured in the current shell. For example in the
config user local
shell:
•
type get to see the list of user names added to the freeGuard 100 configuration,