Frecan Flow 53, Руководство пользователя и инструкция по установке

Страница: 122 / 132

33
Operation
EN

When the automatic mode is active, A remains in the
display. In manual mode the after- run level 1 is displayed.

The fan speed can also be changed in the after-run. After-
run ends immediately if 0 is selected.
5.29 Fan timer
There is the possibility to set a fan timer analogue to the
cooking zone timer. The timer is displayed on the timer display.
The fan timer does not start to run until the cooking process
has finished.
1. Precondition: Fan is active.
2. Select the fan power setting display. Timer indication
displays shows “---“. Press the timer displays.
3. Then use the Plus key or the Minus key to set the
required time.
The timer symbol of the fan lights up.
Notes
The following situations can occur:
Situation1
Fan level set, fan timer set, all cooking zones are switched off
Hob remains on; fan level remains active for timer time.
Then the hob switches off completely.
Situation2
Fan level set, timer set; hob switched off via ON/OFF key
After-run level 1 is set and remains active for the timer setting
time.
Then the hob switches off completely.
Timer can be set as soon as the fan is running and starts to run
as soon as all cooking zones are off.
5.30 Grease filter state indication
The hob touch control includes a filter timer that reminds that is
important to clean the hood’s grease filter on a regular basis
(every 50 hours).
The filter run time is always counted when the fan is running -
even during the after- run. After the time has elapsed a flashing
F is displayed on the fan power setting display.