Frecan Flow 53, Руководство пользователя и инструкция по установке

Страница: 100 / 132

11
4 Installation

Observe all safety and warning information (see
the “Safety Instructions and Warnings” chapter).

Follow the enclosed manufacturer‘s information

Make sure that the area below the cooktop has
a sufficient air supply.
4.1 General installation instructions

The power supply cable must be provided by the
customer.

The appliance must not be installed above
cooling devices, dishwashers, stoves, ovens,
washing machines or dryers.

The contact surface of the worktops and wall
sealing strips must be made of a heat-resistant
material (up to approx. 100 °C).

Worktop cut-outs must be moisture-sealed using
suitable means and, where necessary, fitted
with a thermal insulator.

The integrated cooktop extractor must not be
used with other cooktops.

To ensure that the cooktops perform optimally at
all times, there must be sufficient ventilation
beneath the cooktops.

The performance of the cooktops is affected or
the cooktops overheat if the warm air beneath
the cooktops cannot escape.

If a cooktop overheats, the power is
automatically reduced or the cooktop is switched
off completely (see “Overheating protection”).

If cable protection (false floor) is planned
beneath the appliance, this must be fitted so it
does not obstruct ventilation.
4.2 Scope of delivery
Scope of Delivery: Opera Quantity
Cooktop with integrated extractor 1
Air inlet flap 1
Grease filter 2
Operating and installation instructions 1
Cleaning instructions 1
Duct tape 1
Sealing tape 3
Bag containing assembly parts 1
Metal sheet black canalization 1
Metal sheet telescopic extension 1
Vertical ducting 1
90° bend ducting 1
4.3 Tools and aids
The following special tools are required to correctly
install the cooktop:

Compass saw or hand saw

Meter

Torx 25 screwdriver

Cross-head screwdriver

Black, heat-resistant silicone sealant
Installation
EN