– 7 –
SGP 62 M _/F / SMP 62 M _/F / SMP 66 M _/F / CF 65 M _/F
EN
INSTALLATION
Important:
Installation (Fig. 4) must be carried
out in compliance with current standards and
regulations.
Cabinet requirements
9
For fitted units, the components (plastic
materials and veneered wood) must be
assembled with heat-resistant adhesives
(min. 100 °C):
unsuitable materials and adhesives
can result in warping and ungluing.
9
The cabinet must allow sufficient room for
the electrical connections.
9
The cabinet in which the oven is fitted
must be strong enough to take the weight
of the equipment.
X
Z
The oven must be securely installed in
the recess.
X
Z
The oven can be installed in a column
cabinet or under the top of a modular
unit, provided sufficient ventilation is
guaranteed.
Installation procedure
Fit the appliance in the compartment; fix the
oven to the cabinet with the 4 screws and the
4 bushings provided, using the holes prepared
in the side panels (Fig. 5a).
Note: (Fig. 5b)
If the oven is to be fitted under a cooktop,
firstly turn the top connection (R) to the right or
left so that the oven fits properly (Fig. 5b).
Electrical connection
Franke ovens are supplied with a three-pole
power cable with free terminals.
If the oven is permanently connected to the
power supply, install a device that ensures
disconnection from the power supply, with
a contact opening distance (at least 3 mm)
enabling complete disconnection in category III
overvoltage conditions.
Make sure:
9
The plug and socket are suitable for a
16 A current.
9
Both can be easily reached and are
positioned so that no live part is accessible
when inserting or removing the plug.
9
The plug can be easily inserted.
9
The oven does not rest against the plug
when installed in the cabinet.
9
The terminals of two appliances are not
connected to the same plug.
9
A 3 x 1.5 mm² cable type H05VV-F is used
when replacing the power cable.
9
Make sure you observe the polarities of the
free terminals.
L
N
BLUE
YELLOW-GREEN
BROWN
Brown = Live
Blue = Neutral
Yellow/Green = Earth
Note:
Make sure the characteristics of the household
electrical system (voltage, maximum power
and current) are compatible with those of your
Franke oven.
The mains frequency is established at
switching on.
Содержание 116.0564.030
