____________________________________________________________________________ 4NT 1965 A - 03/2019
1
GENERAL INFORMATION
1.1
BEFORE YOU START
Read this manual before installing the product. It contains instructions for correct and safe use of the product.
This manual contains important instructions to ensure correct installation of the ventilation unit.
The manufacturer reserves the right to make changes to the product documentation without prior notice.
Store this manual for future use and consider it an integral part of the product.
Installation and maintenance must only be carried out by qualified and experienced technicians to ensure compliance
with the local standards in force as well as to maintain the warranty.
1.2
SIGNS
For better identification, you will find the following symbols in the text of the operating manual. The table below
describes the symbols and their meaning.
Symbol
Meaning
NB
Warning or remark
READ CAREFULLY
Important instructions
TECHNICAL ASSISTANCE
Advice and practical information
TECHNICAL INFORMATION
More detailed technical information
Reference to another section or part of the operating manual
Before installation, please read chapter 2. Informations relatives à la sécurité carefully, as it provides detailed
instructions for correct and completely safe use of the product.
1.3
PRODUCT DESCRIPTION
The Power Box® Ready is a dual flow ventilation control unit with a counter-current heat exchanger. It is intended for
use in tertiary buildings. The unit has a filtering stage for fresh air and another for the extracted air. In addition to the
heat exchanger, the Power Box® Ready can be fitted with an electric heater to heat the supplied air.
1.4
RECEIPT OF THE PRODUCT
At the time of delivery, check that the product packaging is intact. If the packaging is damaged in any way, contact the
transporter as soon as possible. A complaint submitted after a delay may not be accepted. Do not use a damaged unit.
Check that the delivered product matches the order. In case of doubt, do not unpack the product and contact France
Air.
After unpacking, check the condition of the units and all their elements. Please contact the supplier if there are any
anomalies. If the unit is to remain packaged after delivery, store it in a dry place, at an ambient temperature of +5°C
to +35°C.
If the ventilation unit has been exposed to temperatures of less than 0°C during transportation, leave the unpacked
unit at room temperature for at least 2 hours before connecting it, in order to ensure the temperature within the unit
is uniform.
Storing the product for a long period of time is not recommended. In the event of long-term storage, a full inspection
will be required, in particular for the fan bearings. Storage for more than one year is not recommended.
Failure to observe these instructions shall render the France Air warranty void.
