Operation PRELIMINARY
User Manual EML1101
6 Operation
6.1 Keyboard
Cursor buttons
−
Navigating in menu structure
−
Changing values and settings
−
Setting numbers
Carriage Return button
−
Selecting a menu
−
Moves cursor to next position
−
Activating stations
−
Printing
MENU button
−
Ascend to the next higher menu level
−
Proceed to display mode after reset
−
Accepting values and settings
6.2 Programming
mode
6.2.1 Selecting program items
Use one of the two cursor buttons to call up the settings menu.
6.2.2 Activating programming mode
A prompt is given for the ID number when the appropriate item is seen in the display. The last 4 digits
of serial number are to be entered. If the ID number has already been prompted from a previous
entry, then it will not be prompted again for
the next
hour.
6.2.3 Setting parameters
If a cursor appears in the display, then the individual numbers can be adjusted by pressing the cursor
buttons. Pressing
CR
button moves the cursor to the next position.
6.2.4 Accepting settings
The setting are accepted by pressing
MENU
button.
If an invalid entry (e.g. time/date) has been
entered, the old settings will appear. In this case repeat the entry.
12
