Fractal AXE-FX III, Руководство пользователя

Страница: 19 / 124

13
1 INTRODUCTION
GLOBAL VOLUME PEDAL SETUP
The Axe-Fx III allows remote control of the volume at all inputs and outputs. If you have a second pedal, or if you
want to use one pedal for global volume instead of expression, follow the instructions below:
The first step is to decide which volume you want to control. Adjusting Input volume affects gain/distortion and
the behavior of level-dependent blocks like the compressor or gate. Adjusting Output volume does not affect
level-dependent blocks, but scales everything you hear including effect tails. For all other volume options, you can
insert a Volume block anywhere in your preset and control it with an “External Controller” as described above
(See also “Modifiers” on p. 55 .)
To set up a global volume pedal, first ensure that you have a pedal connected and ready to use. Then:
1. From the Home page, open SETUP: MIDI/Remote: Other.
2.
NAV
to the entry for the volume you want to control: Input 1, 2, 3, or 4, or Output 1, 2, 3, or 4.
3. Turn the “
A
“ or
VALUE
knob to assign a controller to your selected entry.
ƒ
Select “PEDAL 1 or PEDAL 2” for the onboard Expression jacks
ƒ
Select “FC__ PEDAL __” for a pedal connected via an FC series controller.
ƒ
Select a number if your pedal is transmitting a MIDI CC#. For example, by default, the Fractal Audio
Systems MFC-101 transmits CC#11 for XP1 and CC#16 for XP2.
4. Test and EXIT when finished.
Learn about other options for global remote control in “The MIDI/Remote Menu” on p. 77 .
GLOBAL EXPRESSION PEDAL SETUP
Pedals need to be assigned before they do anything. Once you have connected and calibrated a pedal according
to the instructions on the previous page (or if you are using a MIDI or FC-connected pedal) you can globally assign
it as “External 1”, which is used in many factory presets as a Wah controller.
To set “External 1” to respond to your connected pedal:
1. From the Home page, open SETUP: MIDI/Remote and change to the External page.
2.
NAV
to External Control 1.
3. Turn the “
A”
or
VALUE
knob to set this external controller to your pedal:
ƒ
Select “PEDAL 1” or “PEDAL 2” for the onboard Expression jacks.
ƒ
Select “FC__ PEDAL __” for a pedal connected via an FC series controller.
ƒ
Select a number if your pedal is transmitting a MIDI CC#. For example, by default, the Fractal Audio
Systems MFC-101 transmits CC#11 for XP1 and CC#16 for XP2.
4. EXIT when finished. Most of the first 100 Factory Presets contain a Wah block you can test with.
Learn more about assigning pedals and switches to sound parameters in Section 9: Modifiers .