43
ENG
L
IS
H
NEF67 TM1F
Proceed only if the engine is not in operation and at low temperature,
in order to prevent the risk of burns.
Remove the protective grilles and the fan together with the spacer
by undoing the relative fasteners.
Loosen the bolt (1) anchoring the alternator to its lower support
and the screw (2) fastening the alternator to the bracket.
Using the tool (3), rotate the automatic belt tensioner (4) in the
direction of the arrow and remove the belt (5).
Fit the new ancillary belt inside the shoulders of all the pulleys.
Reposition the fan, together with spacer, in its seat and the
protective grilles and tighten the relative fasteners.
Replace the ancillary belt if it shows signs of abrasions,
cracks or tears or if it is soiled with oil or fuel.
ATTENTION!
When the engine is off, but still hot, the belt may
start to move without warning. Wait for the engine
temperature to decrease to prevent serious danger
of an accident.
13_086_N
