14
USE
PRELIMINARY CHECKS
Each time before starting the engine:
Check and refill technical fluids level if necessary (fuel, engine oil and
coolant).
Make sure that the air intake filter is not obstructed or clogged,
checking at the same time that the mechanical indicator on the filter
does not show the "red" signal. If the engine has an electric clogging
sensor, the alarm will be produced upon start due to the luminous
indicator placed on the instrument panel.
Note:
The procedures required to clean the filter are indicated
in the CHECKS AND MAINTENANCE section.
FOR PROPER USE OF THE ENGINE
Before starting the engine each time, check that the tank contains
a sufficient amount of fuel.
Avoid prolonging the duration of the start control.
Follow the prescriptions shown on the maintenance plan.
During use, periodically check that:
- the temperature of the engine coolant does not reach the alarm
thresholds;
- the oil pressure remains within normal values.
The speed and power values must comply with that specified in the
technical-commercial documentation.
Particular attention must be paid to engines that equip the
emergency generating units for which frequent efficiency checks are
required in order to guarantee their prompt start in all cases when
required.
ATTENTION!
Make sure that no fuel vapours or gasses are present
in the area in which the engine should be operated.
Ensure that closed areas are adequately ventilated and
fitted with a suitable exhaust extraction system.
In case of use in extremely dusty environments and
according to the final configuration of the generator,
soundproofed or without hood, special protections
must be provided on the most sensitive components.
