45
ENG
L
IS
H
Adjustment of valve/rocker arm clearance
The adjustment of the clearance between the rocker arms and the
intake and exhaust valve control bridges must be strictly carried out
using an Allen wrench (1), box-end wrench (2) and a feeler gauge (3).
The values to be checked are detailed below:
Intake valve: 0.25 ± 0.05 mm
Exhaust valve: 0.50 ± 0.05 mm
13_087_N
The operations described above require the use of
specific tools which guarantee safe and effective
results.
It is recommended that such operations are carried out
by qualified personnel of the FPT Technical Service
Network.
