38
Blow-by filter replacement
Proceed only if the engine is not in operation and at low temperature,
in order to prevent the risk of burns.
Unscrew the three fastening screws and remove the blow-by filter
(1) from the tappet cover (3).
Replace the blow-by filter (1) and the relative gasket (2).
Position the new blow-by filter (1) in its seat on the tappet cover
(3).
Eliminate the consumables and any materials in
contact with them (for example, filters) in
accordance with current regulations.
The FPT Technical Service Network workshops are
equipped for this purpose.
13_072_N
