FP FPi2000 Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 26

FP FPi2000 Скачать руководство пользователя страница 8

8

Moistening the brushes

The water tray must always be filled with a
special sealing liquid or water and the brushes
must be moistened. An extra set of brushes is
provided so that one set can be soaked in water.
For this a special section is available in the
water tray. Refer to chapter "Maintenance".

2.3

Display

The display shows the operating screens and
keys for operating the system (see figure
below). The keys below are used for the
functions: start/stop (combined key) and
escape. The four keys on the right of the display
are used for the corresponding functions shown
in the screens.

Press the start/stop key to start the machine.
When the start/stop key is pressed again the
machine stops feeding after completing the set.
It is possible that there are still documents left in
the document feeder (for example a small card).
Remove all these documents from the feeder
before restarting another job. There can also be
envelopes left in the envelope track. These
envelopes must be removed when another type
of envelopes is required.
The escape key can be used to exit a menu
without saving any settings.

3.

OPERATING THE SYSTEM

3.1

Switching on

The system can be switched on or off with the
power switch on the back of the system. Refer
to section "Operating controls". After starting up,
the display shows "main menu (1)”.

3.2

The main menu

The main menu consists of two menus, "main
menu (1)" and "main menu (2)". Press key 4 in
"main menu (1)", to go to "main menu (2)".
Press key 4 again to get back to "main menu
(1)".

3.3

Main menu (1)

Main menu (1) shows the following functions
(see figure above):

• job info (

),

• other job,
• Fill & Start.

3.4

Job info

When key 1 is pressed in "main menu (1)", the
"job info" screen will be displayed (see figure
below). Press the escape key to go back to
"main menu (1)".

The "job info" screen shows the following job
settings:

• envelope ( ) or no envelope (

),

• type of document fold ( ),
• document double feed detection "on" or "off"

( ),

• which feeders are selected ( black is

selected),

• which feeders are linked (

feeder swap),

• the number of documents per feeder( ),

• the length of the document in the feeder ( ),

• daily mail (

) "on "or "off",

• OMR (Optical Mark Reading) (

) "on" or

"off".

«
...
6
7
8
9
10
...
»

Содержание FPi2000



























Отзывы:

Нет отзывов