FP FPi2000, Руководство оператора, Страница: 16 / 26

16
• confirm the settings by pressing “OK” which
will get you back to the “job settings” menu.
The fold length of the first fold can be minimally 75
mm (2.95 inch) and maximally the length of the
longest document used minus 100 mm (4.0 inch).
The fold length of the second fold can be minimally
the length of the first fold plus 25 mm (1.0 inch)
and maximally the length of the longest document
used minus 75 mm (3.0 inch).
5.4 Double Feed Control
When the “DFC settings” menu is selected the
following functions are available (see figure
below):
5.5 OMR settings (Optional)
Refer to the chapter "Optical Mark Reading".
5.6 Job name
This menu shows the following functions (see
figure below):
6. OPTICAL MARK READING
(OPTIONAL)
The folding and inserting system can be
equipped with Optical Mark Reading. With this
option the system reads optical marks that have
been specially printed on the documents. This
code contains information about the processing
of the documents. A set can have a varying
number of sheets. The document with the
printed code is placed in the upper feeder.
6.1 Adjustments
Reading head position
The reading head must be placed according to
the (horizontal) position of the printed marks on
the documents. To adjust the reading head,
proceed as follows:
• take a document with a reading code,
• fold the document on the first mark (see next
figure).
• hold the document onto the ruler (see next
figure),
• adjust the reading head A according to the
middle of the marks,
• divide the paper guides B along the width of
the document.
When the reading head is adjusted it is possible
that some paper guides B have to be removed
and replaced on the other side of the reading
head.
The replacement procedure is the reversal of
the removal procedure.