FP FPi2000, Руководство оператора, Страница: 12 / 26

12
3.9 Adjustments for envelope
feeding
Envelope separation
Adjust the envelope separation by turning knob
A (see figure below) counter clockwise until two
envelopes (flap down and "trailing"), one on top
of the other, can be moved backward and
forward between the rollers without resistance.
Turn knob A clockwise until one envelope will
just pass between the rollers.
Side guides
The bottom envelope must enter the separator
first. Adjust the side guides C (see figure above)
by turning the thumbwheel D to provide enough
space to move freely. Too much play causes
skewing.
Filling the envelope feeder
Fan the stack of envelopes a bit and place the
bottom envelope between the separation rollers
(flap down and trailing). Sometimes envelopes
may skew on the insert table. The envelope
support B (see figure above) can be rotated
slightly to compensate this. Shift the envelope
support B in or out so that the flap side of the
envelope is lifted about 20 mm (0.8 inch). Turn
the envelope support B so that the weight of the
envelopes is distributed evenly on both sides.
Envelope sealing
Envelopes can be sealed or not sealed. To
switch sealing "on" or "off", pull the hand grip of
the upper cover upward and pull it into the
vertical position.
Shift the blue handle towards to switch
sealing off or towards to switch sealing on.
3.10 Insert position
Press key 2 in the "main menu (2)" to enter the
"Insert position" menu (see figure below).
Press key 1 in the "Insert position" menu to
bring one envelope onto the insert position.
Open the upper cover. The flap folding line must
be positioned under the green indicator B (see
figure below). If necessary adjust the flap folding
line position by pressing key 2 or 3 in the "Insert
position" menu.
Each key stroke stops the next envelope 0,5
mm (0.02 inch) to the right (earlier) or to the left
(later). Check the settings by pressing key 1
again.
Save the insert position settings with "OK" which
will get you back to the "main menu (2)" again.