FP FPi2000 Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 26

FP FPi2000 Скачать руководство пользователя страница 24

24

7.4

OMR error codes

error description

suggested solution

information

Error code

Reading error.

Remove the documents and
adjust the 1st mark from the
top position correctly.

Wrong window position.

3 : 112

Reading error.

Remove the current
suspected set and check the
next set.

Suspected set after error. 3 : 114

Reading error.

Remove the documents and
adjust the reading head.
Adjust the1st mark from the
top position correctly. When
the error still occurs, contact
your service organization.

Not enough marks.

3 : 120

Reading error.

Remove the documents and
check the used OMR code.

No basic command.

3 : 122

Reading error.

Remove the documents and
check the used OMR code.
Adjust the reading head.

Wrong parity in code.

3 : 126

Reading error.

Remove the documents and
check the used OMR code
(flex-dongle).

Undefined mark found

3 : 127

Reading error.

Remove the documents and
check the used OMR code’s
(mark line distance).

Wrong mark distance.

3 : 128

Reading error.

Remove the documents and
check the used OMR code
(flex-dongle).

Too many marks.

3 : 129

Too many sheets.

Remove the documents.
Check the set and complete
the set manually.

Set size exceeded.

3 : 134

Incomplete set.

Remove the documents.
Check the set and complete
the set manually.

Part of previous set.

3 : 135

Service assistance is needed for the error codes with the message “technical failure”. First write down
the error code, then switch the inserter off and on again, to verify system operation. When the error still
occurs contact your service organization.

«
...
22
23
24
25
26
»

Содержание FPi2000



























Отзывы:

Нет отзывов