manualshive.com logo in svg

FP FPi2000, Руководство оператора, Страница: 21 / 26

Поделиться
Скачать
FP FPi2000 Скачать руководство пользователя страница 21

21

ENGLIS

H

7.3

Operator troubleshooting 

Symptom

Possible cause

Remedy

Section

The machine cannot be 
started after switching 
on.

Machine not connected 
to mains.

Connect the machine to 
the mains.

-

Fuse is blown.

Replace fuse below 
power switch.

-

A cover is opened.

Close the covers

-

Machine stops with 
envelope at insert 
position (flap not open).

Envelopes stacked 
reversed in the hopper.

Check envelope feed 
adjustments. Place 
envelopes correctly in 
hopper.

Adjustments for 
envelope feeding.

Envelope flap sticks.

Store envelopes 
according to 
specifications.

Specifications.

Wrong envelope type 
used (not according 
specifications or job 
settings).

Change envelopes 
according to 
specifications.

Specifications.

Envelopes are double 
fed.

Envelope separation not 
correctly adjusted.

Check separation 
settings, adjust if 
needed.

Adjustments for 
envelope feeding.

Envelopes not placed 
properly in the hopper.

Check and replace if 
needed.

Adjustments for 
envelope feeding.

Envelope stop skewed. Side guides of the 

envelope hopper are set 
too wide.

Check side guides and 
adjust if needed.

Adjustments for 
envelope feeding.

Envelopes are fed 
irregularly.

Hopper almost empty.

Refill hopper.

Adjustments for 
envelope feeding.

Separation set too 
narrow.

Check separation 
settings, adjust if 
needed.

Adjustments for 
envelope feeding.

Side guides set too 
narrow.

Check side guides and 
adjust if needed.

Adjustments for 
envelope feeding.

Envelope support not 
positioned correctly.

Reposition the envelope 
support.

Adjustments for 
envelope feeding.

Flap is wrinkled and 
sometimes not opened.

Envelope not within 
specifications.

Check specifications 
and change envelopes if 
needed.

Specifications.

Содержание FPi2000



























Отзывы:

Нет отзывов