June 2006
© 2006 Foundry Networks, Inc.
6 - 1
Chapter 6
Maintaining the Hardware
This chapter provides instructions for maintaining the FastIron stackable hardware.
WARNING:
The procedures in this manual are for qualified service personnel.
This chapter contains the following information:
Hardware Maintenance Schedule
The FastIron stackable switch requires minimal maintenance for its hardware components. Foundry recommends
cleaning the fiber-optic connectors on a fiber-optic port and the connected fiber cable each time you disconnect
the cable.
Otherwise, you can replace the following hardware components as needed:
•
Copper and fiber optic modules (SFPs (mini-GBICs) and XFP transceivers)
•
Power supplies
•
10-Gigabit Ethernet module
Table 6.1: Chapter Contents
Description
See Page
Recommended hardware maintenance schedule
6-1
Replacing a power supply
6-2
Installing or replacing a 10-GbE module
6-6
Replacing a fiber optic module (SFP (mini-GBIC) or XFP)
6-7
Cleaning the fiber-optic connectors
6-9
Содержание FES
Страница 32: ...Foundry Hardware Installation Guide for the FES FESX and FWSX 2 22 2006 Foundry Networks Inc June 2006...
Страница 56: ...Foundry Hardware Installation Guide for the FES FESX and FWSX 4 12 2006 Foundry Networks Inc June 2006...
Страница 72: ...Foundry Hardware Installation Guide for the FES FESX and FWSX 6 10 2006 Foundry Networks Inc June 2006...
Страница 84: ...Foundry Hardware Installation Guide for the FES FESX and FWSX 7 12 2006 Foundry Networks Inc June 2006...