Foundry Hardware Installation Guide for the FES, FESX, and FWSX
3 - 2
© 2006 Foundry Networks, Inc.
June 2006
Package Contents
•
Foundry Networks FastIron Edge Switch, FastIron Edge Switch X-Series, or FastIron Workgroup Switch X-
Series
•
115V AC power cable (for AC sourced devices)
•
Rack mount brackets and mounting screws
•
CD-ROM containing software images and the user documentation (including this guide)
•
Warranty card
General Requirements
To manage the system, you need the following items for serial connection to the switch or router:
•
A management station, such as a PC running a terminal emulation application.
•
A straight-through EIA/TIA DB-9 serial cable (F/F). The serial cable can be ordered separately from Foundry
Networks. If you prefer to build your own cable, see the pinout information in “Attaching a PC or Terminal” on
page 3-10.
You use the serial connection to perform basic configuration tasks including assigning an IP address and network
mask to the system. This information is required for managing the system using the Web management interface
or IronView Network Manager or using the CLI through Telnet.
WARNING:
Do not use the handles on the power supply units to lift or carry a Foundry device.
Содержание FES
Страница 32: ...Foundry Hardware Installation Guide for the FES FESX and FWSX 2 22 2006 Foundry Networks Inc June 2006...
Страница 56: ...Foundry Hardware Installation Guide for the FES FESX and FWSX 4 12 2006 Foundry Networks Inc June 2006...
Страница 72: ...Foundry Hardware Installation Guide for the FES FESX and FWSX 6 10 2006 Foundry Networks Inc June 2006...
Страница 84: ...Foundry Hardware Installation Guide for the FES FESX and FWSX 7 12 2006 Foundry Networks Inc June 2006...