Product Overview
June 2006
© 2006 Foundry Networks, Inc.
2 - 3
Software Features
Software features differ depending on the software version that is loaded on the device. When first shipped,
Standard and POE devices support full Layer 2 and base Layer 3 Switching. FWSX devices support full Layer 2
Switching only. Premium (PREM) devices support full Layer 2 Switching and full Layer 3 multiprotocol routing. All
FES and FESX devices can be upgraded to premium models, meaning all models can support full Layer 3
multiprotocol routing.
For a complete list of software features supported on the FESX or FWSX, see the release notes or the
Foundry
FastIron X-Series Configuration Guide
. For a complete list of software features supported on FES, see the FES
release notes.
POE Applications
Foundry’s FES2402-POE, FES4802-POE, and FESX424-POE provide Power over Ethernet, compliant with the
standards described in the IEEE 802.3af specification for delivering in-line power. The 802.3af specification
defines the standard for delivering power over existing network cabling infrastructure, enabling multicast-enabled
full streaming audio and video applications for converged services, such as, Voice over IP (VoIP), WLAN access
points, IP surveillance cameras, and other IP technology devices.
POE technology eliminates the need for an electrical outlet and dedicated UPS near IP powered devices. With
power sourcing devices, such as Foundry’s FES2402-POE and FES4802-POE, power is consolidated and
centralized in the wiring closets, improving the reliability and resiliency of the network. Because POE can provide
power over Ethernet cable, power is continuous, even in the event of a power failure.
For more information about POE and how to configure it on FES devices, see the
Foundry Switch and Router
Installation and Basic Configuration Guide
. For information about POE and how to configure it on FESX devices,
see the
Foundry FastIron X-Series Configuration Guide
.
Wireless Applications
You can convert (upgrade) your FastIron Edge Switch to an IronPoint-FES device. Converting your FES to an
IronPoint–FES allows you to run a software image that contains wireless feature support.
To convert your FES to an IronPoint-FES, you need an EEPROM kit, part number FESWLAN. The kit includes a
Dual Inline Package (DIP) key, IronPoint-FES software, upgrade instructions, and other items. Alternatively, you
can order an IronPoint-FES with the EEPROM and wireless software already installed.
You can convert the following FES devices to an IronPoint-FES:
•
FastIron Edge Switch 2402
•
FastIron Edge Switch 4802
•
FastIron Edge Switch 9604
•
FastIron Edge Switch 2402–DC
•
FastIron Edge Switch 4802–DC
•
FastIron Edge Switch 9402–DC
•
FastIron Edge Switch 2402-POE
•
FastIron Edge Switch 4802-POE
NOTE:
You cannot convert the FES12GCF, FastIron Edge Switch X-Series, FastIron Workgroup Switch X-
Series, and FastIron SuperX to an IronPoint–FES device.
Содержание FES
Страница 32: ...Foundry Hardware Installation Guide for the FES FESX and FWSX 2 22 2006 Foundry Networks Inc June 2006...
Страница 56: ...Foundry Hardware Installation Guide for the FES FESX and FWSX 4 12 2006 Foundry Networks Inc June 2006...
Страница 72: ...Foundry Hardware Installation Guide for the FES FESX and FWSX 6 10 2006 Foundry Networks Inc June 2006...
Страница 84: ...Foundry Hardware Installation Guide for the FES FESX and FWSX 7 12 2006 Foundry Networks Inc June 2006...