Connecting Network Devices and Checking Connectivity
June 2006
© 2006 Foundry Networks, Inc.
4 - 11
Syntax:
phy cable-diag tdr <port-num>
Viewing the Results of the Cable Analysis
To display the results of the cable analysis, enter a command such as the following at the Privileged EXEC level of
the CLI:
Syntax:
show cable-diag tdr <port-num>
Table 4.3 defines the fields shown in the command output.
Table 4.3: Cable Statistics
This Line...
Displays...
Port
The interface that was tested.
Speed
The port’s current line speed.
Local pair
The local link name.
Pair Length
The cable length when terminated, or the distance to the point of fault
when the line is not up.
Remote pair
The remote link name.
Pair status
The status of the link. This field displays one of the following:
•
Terminated: The link is up.
•
Shorted: A short is detected in the cable.
•
Open: An opening is detected in the cable.
•
ImpedMis: The impedance is mismatched.
•
Failed: The TDR test failed.
FESX Switch#sh cable-diag tdr 1
Port Speed Local pair Pair Length Remote pair Pair status
--------- ----- ---------- ----------- ----------- -----------
01 1000M Pair A <50M Pair B Terminated
Pair B <50M Pair A Terminated
Pair C <50M Pair D Terminated
Pair D <50M Pair C Terminated
Содержание FES
Страница 32: ...Foundry Hardware Installation Guide for the FES FESX and FWSX 2 22 2006 Foundry Networks Inc June 2006...
Страница 56: ...Foundry Hardware Installation Guide for the FES FESX and FWSX 4 12 2006 Foundry Networks Inc June 2006...
Страница 72: ...Foundry Hardware Installation Guide for the FES FESX and FWSX 6 10 2006 Foundry Networks Inc June 2006...
Страница 84: ...Foundry Hardware Installation Guide for the FES FESX and FWSX 7 12 2006 Foundry Networks Inc June 2006...