![background image](http://html1.mh-extra.com/html/foundry-networks/fastiron-edge-switch-x424/fastiron-edge-switch-x424_manual_2324269061.webp)
Configuring Basic Layer 2 Features
December 2005
© Foundry Networks, Inc.
4 - 5
NOTE:
VLAN ID 4094 is reserved for use by Single STP. VLAN IDs 4091 and 4092 are reserved for use in the
Layer 3 Switch and Base Layer 3 images. You can configure these VLAN IDs in the Layer 2 Switch image.
NOTE:
The second command is optional and also creates the VLAN if the VLAN does not already exist. You can
enter the first command after you enter the second command if you first exit to the global CONFIG level of the CLI.
Assigning IEEE 802.1Q Tagging to a Port
When a port is tagged, it allows communication among the different VLANs to which it is assigned. A common
use for this might be to place an email server that multiple groups may need access to on a tagged port, which in
turn, is resident in all VLANs that need access to the server.
NOTE:
Tagging does not apply to the default VLAN.
When using the CLI, ports are defined as either tagged or untagged at the VLAN level.
Command Syntax
Suppose you want to make port 5 a member of port-based VLAN 4, a tagged port. To do so, enter the following:
FESX424 Router(config)# vlan 4
FESX424 Router(config-vlan-4)# tagged e 5
Syntax:
tagged ethernet [<slotnum>/]<portnum> [to [<slotnum>/]<portnum> [ethernet [<slotnum>/]<portnum>...]]
The <slotnum> parameter is required on chassis devices.
Defining MAC Address Filters
MAC layer filtering enables you to build access lists based on MAC layer headers in the Ethernet/IEEE 802.3
frame. You can filter on the source and destination MAC addresses. The filters apply to incoming traffic only.
You configure MAC filters globally, then apply them to individual interfaces. To apply MAC filters to an interface,
you add the filters to that interface’s MAC filter group.
The device takes the action associated with the first matching filter. If the packet does not match any of the filters
in the access list, the default action is to drop the packet. If you want the system to permit traffic by default, you
must specifically indicate this by making the last entry in the access list a permit filter. Here is an example:
mac filter
<last-index-number>
permit any any
For devices running Layer 3 code, the MAC filter is applied only to those inbound packets that are to be switched.
This includes those ports associated with a virtual routing interface. However, the filter is not applied to the virtual
routing interface. It is applied to the physical port.
NOTE:
Inbound traffic on a port to which a Layer 2 MAC filter is assigned is sent to the CPU for processing.
When you create a MAC filter, it takes effect immediately. You do not need to reset the system. However, you do
need to save the configuration to flash memory to retain the filters across system resets.
For complete MAC filter examples, see the
Foundry Switch and Router Command Line Interface Reference
.
Configuration Notes
•
MAC filtering on FastIron devices is performed in hardware.
•
Layer 2 MAC filtering on FastIron devices differ from other Foundry devices in that you can only filter on
source and destination MAC addresses. Other Foundry devices allow you to also filter on the encapsulation
type and frame type.
•
Use MAC Layer 2 filters only for switched traffic. If a routing protocol (for example, IP) is configured on an
interface, a MAC filter defined on that interface is not applied to inbound packets. If you want to filter inbound
Содержание FastIron Edge Switch X424
