Foundry Configuration Guide for the FESX, FSX, and FWSX
21 - 76
© Foundry Networks, Inc.
December 2005
State
The state of the router’s session with the neighbor. The states are
from this router’s perspective of the session, not the neighbor’s
perspective. The state values are based on the BGP4 state machine
values described in RFC 1771 and can be one of the following for
each router:
•
IDLE – The BGP4 process is waiting to be started. Usually,
enabling BGP4 or establishing a neighbor session starts the
BGP4 process.
•
A minus sign (-) indicates that the session has gone down
and the software is clearing or removing routes.
•
ADMND – The neighbor has been administratively shut down.
See “Administratively Shutting Down a Session with a BGP4
Neighbor” on page 21-20.
•
A minus sign (-) indicates that the session has gone down
and the software is clearing or removing routes.
•
CONNECT – BGP4 is waiting for the connection process for the
TCP neighbor session to be completed.
•
ACTIVE – BGP4 is waiting for a TCP connection from the
neighbor.
Note
: If the state frequently changes between CONNECT and
ACTIVE, there may be a problem with the TCP connection.
•
OPEN SENT – BGP4 is waiting for an Open message from the
neighbor.
•
OPEN CONFIRM – BGP4 has received an OPEN message from
the neighbor and is now waiting for either a KEEPALIVE or
NOTIFICATION message. If the router receives a KEEPALIVE
message from the neighbor, the state changes to Established. If
the message is a NOTIFICATION, the state changes to Idle.
•
ESTABLISHED – BGP4 is ready to exchange UPDATE
messages with the neighbor.
•
If there is more BGP data in the TCP receiver queue, a plus
sign (+) is also displayed.
Note
: If you display information for the neighbor using the
show ip bgp neighbor
<ip-addr> command, the TCP
receiver queue value will be greater than 0.
Time
The amount of time this session has been in its current state.
KeepAliveTime
The keep alive time, which specifies how often this router sends keep
alive messages to the neighbor. See “Changing the Keep Alive Time
and Hold Time” on page 21-21.
HoldTime
The hold time, which specifies how many seconds the router will wait
for a KEEPALIVE or UPDATE message from a BGP4 neighbor before
deciding that the neighbor is dead. See “Changing the Keep Alive
Time and Hold Time” on page 21-21.
PeerGroup
The name of the peer group the neighbor is in, if applicable.
Table 21.7: BGP4 Neighbor Information (Continued)
This Field...
Displays...
Содержание FastIron Edge Switch X424
