Foundry Configuration Guide for the FESX, FSX, and FWSX
22 - 22
© Foundry Networks, Inc.
December 2005
This display shows the following information.
Table 22.4: CLI Display of VRRP or VRRPE Detailed Information
This Field...
Displays...
Total number of VRRP (or VRRP-
Extended) routers defined
The total number of VRIDs configured on this Layer 3 Switch.
Note
: The total applies only to the protocol the Layer 3 Switch is
running. For example, if the Layer 3 Switch is running VRRPE, the
total applies only to VRRPE routers.
Interface parameters
Interface
The interface on which VRRP or VRRPE is configured. If VRRP or
VRRPE is configured on multiple interfaces, information for each
interface is listed separately.
auth-type
The authentication type enabled on the interface.
VRID parameters
VRID
The VRID configured on this interface. If multiple VRIDs are
configured on the interface, information for each VRID is listed
separately.
state
This Layer 3 Switch’s VRRP or VRRPE state for the VRID. The state
can be one of the following:
•
initialize – The VRID is not enabled (activated). If the state
remains “initialize” after you activate the VRID, make sure that the
VRID is also configured on the other routers and that the routers
can communicate with each other.
Note
: If the state is “initialize” and the mode is incomplete, make
sure you have specified the IP address for the VRID.
•
backup – This Layer 3 Switch is a Backup for the VRID.
•
master – This Layer 3 Switch is the Master for the VRID.
administrative-status
The administrative status of the VRID. The administrative status can
be one of the following:
•
disabled – The VRID is configured on the interface but VRRP or
VRRPE has not been activated on the interface.
•
enabled – VRRP or VRRPE has been activated on the interface.
mode
Indicates whether the Layer 3 Switch is the Owner or a Backup for the
VRID.
Note
: If “incomplete” appears after the mode, configuration for this
VRID is incomplete. For example, you might not have configured the
virtual IP address that is being backup up by the VRID.
Note
: This field applies only to VRRP. All Layer 3 Switches
configured for VRRPE are Backups.
Содержание FastIron Edge Switch X424
