Fostex D-1624 Скачать руководство пользователя | Manualshive

Страница: 60 / 136

background image

60

D824/D1624 Reference Manual (Cue & Review Function)

5

Cue & Review Function

2

1, 4

1

This chapter explains how to use the “Cue & Review” function with the REWIND button, the F FWD
button, and the SHUTTLE dial, and also explains “Digital Scrubbing” with the envelope function.
During Cue/Review and Digital Scrubbing you will hear the sound recorded on the disk, which
makes it easy for you to swiftly locate the desired point without failure while listening to the
sounds.

The prerequisite of the following operation is that the time base is ABS, however, the operation can
be executed in any time base. To execute this function with a non-ABS time base there is a need to
priory switch over to the desired time base.

Cue & Review function using the REWIND and F FWD buttons

You may cue & review the audio data at five-times speed while the recorder is playing.

1. Press the PLAY button to play the audio data.

2. Press the F FWD button during playback.

This cues in the forward direction at five-times speed.
The PLAY LED and F FWD LED lights up while cuing is
taking place.

3. Adjust the monitor sound of the track to monitor on the

mixer.

4. Press the PLAY button again to restore the original play

back speed.

5. Press the REWIND button instead of the F FWD button.

This cues in the rewind direction at five-times speed.
The PLAY LED and REWIND LED lights up while cuing is
taking place.

6. Press the PLAY button to restore the original playback

speed.

Cue & Review function using the SHUTTLE dial

You can use the SHUTTLE dial for +1~-7 times or -1~-8 times

1. Press the PLAY button to start playback.

2. Turn the SHUTTLE dial clockwise during playback.

The forward direction cue speed variates from +1~ -7
times speed depending on the degree (angle) of turning
the dial. PLAY LED flashes and F FWD LED lights up

during the cue process.

3. Adjust the monitor sound of the track to monitor on the

mixer.

4. Let go of the SHUTTLE dial to return to normal play

speed.

5. Similarly, turn the SHUTTLE dial counterclockwise

during playback.

The rewind direction review speed variates from -1~ -8
times speed depending on the degree (angle) of turning
the dial. PLAY LED flashes and REWIND LED lights up
during the review process.

6. Let go of the SHUTTLE dial to return to normal play

speed.

Digital scrubbing using the envelope function

You may perform digital scrubbing using the “Envelope Function” of the recorder while the recorder
is stopped. The envelope function allows digital scrubbing for each track recorded. The display
will show the envelope indication of the track selected.

«
...
58
59
60
61
62
...
»

Содержание D-1624









































































































































Отзывы:

Нет отзывов

Похожие инструкции для D-1624

Бренд: Daewoo Страницы: 33

Бренд: Daewoo Страницы: 60

Бренд: Olympus Страницы: 171

Бренд: Olympus Страницы: 45

Бренд: Saramonic Страницы: 2

Бренд: Olympus Страницы: 3

Бренд: Olympus Страницы: 63

Бренд: Novus Страницы: 73

Бренд: Targus Страницы: 31

Бренд: Yamaha Страницы: 35

Бренд: Panasonic Страницы: 128

Diga DMR-BWT720

Бренд: Panasonic Страницы: 120

Бренд: TeleCorder Страницы: 26

mAVR H.264x4 TFT

Бренд: TS-market Страницы: 8

Бренд: switel Страницы: 17

Бренд: Reflexion Страницы: 24

Crystal Pressure nVision

Бренд: Ametek Страницы: 51

Бренд: Bticino Страницы: 62

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды