131
D824/D1624 Reference Manual (MIDI Implementation Chart/MMC List)
03 (<edit message>)." Upon completing the registeration, <edit
message> will reply with "01 (completed)," or with "10 (over
value error)" if registeration is attempted at a non-existing point
or an erroneous figure is used.
14 04 (<mmc time>): Preroll time set command
The command for setting the current program preroll time at
the figure indicated by <mmc time>.
14 06 (<frame rate>): Frame rate set command
The command for setting the current program frame rate at
the figure indicated by <frame rate>.
14 08 (<time base>): Time base set command
The command for setting the current program time base of
this equipment to that indicated by <time base>.
The Status Request Command
22 21: loop operation status request
The command inquiring the loop operation mode setup sta-
tus. D824/D1624 will reply with "32 21 (<loop op.mode=12>)."
22 22: loop on/off status request
The command inquiring the loop on/off (=ON/OFF of AUTO
RETURN) setup status. D824/D1624 will reply with "32 22
(<on/off>)."
22 28: post locate status request
The command inquiring the post locate mode (ON/OFF of AUTO
PLAY) setup status. D824/D1624 will reply with "32 28 (<post
locate mode>)".
22 2D: auto rec status request
The command inquiring the auto rec mode setup status and
this is replied by "32 2D (<edit message>)." Reply from D824/
D1624 against this status request will be either one of the fol-
lowing:
<edit message> =05: Possible to undo rehearsal mode.
=06: Possible to undo take mode.
=72: off
22 41: lock status request
The command inquiring the slave on/off setup status and the
lock status. D824/D1624 will reply with "32 41 (<lock sta-
tus>)."
22 42 : lock mode status request
The command for inquiring the lock mode setup status and
this is replied with "32 42 <lock mode>."
22 45: copy clip status request
The command inquiring the clipboard condition. If there is a
copy paste data in the clipboard, D824/D1624 will reply with
"32 45 (<edit message=01>)." If data in the clipboard is for
move paste or there is no valid data in it, it will reply will "32
45 (<edit message=14 (void data)>)."
22 46: copy paste status request
The command inquiring execution status of copy paste edit-
ing. When this command is received, D824/D1624 will reply
with either "32 46 (<edit message=02><mmc time>)" or "32
46 (<edit message=00>)." <mmc time> indicates unprocessed
time until completion.
22 47: erase status request
The command inquiring execution status of erase.
When this command is received, D824/D1624 will reply by
either "32 47 (<edit message=02><mmc time>)" or "32 47
(<edit message=00>)." <mmc time> indicates unprocessed time
until completion.
22 4D: move clip status request
The command inquiring the clipboard status. If there is a move
paste data on the clipboard, D824/D1624 will reply with "32
4D (<edit message=01>)." If data in the clipboard is for copy
paste or there is no valid data on it, "32 4D (<edit message=14
(void data)>)" will be replied.
22 4E: move paste status request
The command inquiring the move paste execution status.
When this command is received, D824/D1624 will reply with
"32 4E (<edit message=02><mmc time>)" or "32 4E (<edit mes-
sage=00>)." <mmc time> indicates unprocessed time until
completion.
23 41: digital in channel status request
23 41: adat in channel status request
The command inquiring the digital in channel setup status.
When this command is received, D824/D1624 will reply with
“33 41 (<channel> <channel>)” or “33 41 (<channel=7F>
<count> <mmc track>).”
23 42: digital out channel status request
23 42: adat out channel status request
The inquiring the digital out channel setup status.
When this command is received, D824/D1624 will reply with
“33 42 (<channel><channel>)” or “33 42 (<channel=7F> <chan-
nel=0>).
23 43: program status request
The command inquiring the presently operating program num-
ber. When this command is received, D824/D1624 will reply
with "33 43 (<program>)."
23 44: click on/off status request
The command inquiring the metronome on/off status of D824/
D1624. When this command is received, D824/D1624 will
reply with "33 44 (<on/off>)."
23 45: level status request
The command inquiring the present output level data of the
1~8 tracks. In D824/D1624 as the level data is updated about
every 40msec., inquiry in 40msec. units is effective.
When this command is received, D824/D1624 will reply with
"33 45 (<count=10><level data>)."
23 46: resolution status request
The command for inquiring the resolution on/off setup status.
When this command is received, this equipment replies with
"33 46 <on/off>."
Содержание D-1624
Страница 136: ...Memo...
