manualshive.com logo in svg

Fostex D-160, Руководство пользователя

Fostex D-160 - многофункциональный цифровой музыкальный рекордер с высоким качеством звука. Владелец может загрузить бесплатное Руководство пользователя с нашего сайта, чтобы узнать все функции и возможности этого устройства. Скачайте его с manualshive.com и начните создавать музыку высокого качества прямо сейчас!

Поделиться
Скачать
background image

D-160 Owner's Manual (MMC/FEX List/Maintenance/Specifications)

182

13 43(<program>): program change command

The command for PROGRAM CHANGE of D-160.  The present program number can be
changed to the figure indicated by <program>.

13 44 (<on/off>): click on/off command

The command for setting the metronome on/off of D-160.  When ON is set, the
metronome signal will be fed to the track 16 output (analog output only) of D-160.

13 46 (<on/off>): Bar/Beat Resolution ON/OFF command

The command for ON/OFF of the bar/beat resolution function of this equipments' current
program.

13 47 (<midi sync>): Midi Sync Out command

The setup command for MIDI Sync Out mode of this equipments' current program.

13 48 (<MTC offset mode>): MTC offset mode command

The setup command for MTC offset mode of this equipments' current program.

13 49 (<count=3> <on/off> <vari data>): Vari pitch command

13 49 (<count=1> <on/off>): Vari pitch command

The command for setting this equipments' vari pitch ON/OFF and pitch data.
Control of ON/OFF only is possible at <count=1> and both ON/OFF and pitch data can be
set at <count=3>.

14 01 (<signature map>): Signature set command

The command for setting the meter of this equipment.  If a new data is registered at the
bar position where a data exists, the former data will be written over.  When this command
is received, this equipment will reply with "34 00 (<edit message>)."  Upon completing
the registeration, <edit message> will reply with "01 (completed)," or with "10 (over
value error)" if registeration is attempted at a non-existing point or an erroneous figure
is used.

14 02 (<tempo set map>): Tempo set command

The command for tempo set of this equipment.  If a new data is registered in a bar/meter
where data already exists, the former data will be written over.  When this command is
received, this equipment will reply with "34 00 (<edit message>)."  Upon completing the
registeration, <edit message> will reply with "01 (completed)," or with "10 (over value
error)" if registeration is attempted at a non-existing point or an erroneous figure is
used.

14 03 : Tempo map all erase command

When this command is received, this equipment will erase all meter and tempo data in
the current program and thus return it to the default state (meter=4/4, tempo: =120).
Also, when this command is received, this equipment will reply with "34 00 (<edit
message>)."  Upon completing the registeration, <edit message> will reply with "01
(completed)," or with "10 (over value error)" if registeration is attempted at a non-existing
point or an erroneous figure is used.

14 04 (<mmc time>): Preroll time set command

The command for setting the current program preroll time at the figure indicated by
<mmc time>.

14 06 (<frame rate>): Frame rate set command

The command for setting the current program frame rate at the figure indicated by
<frame rate>.

Содержание D-160





































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для D-160

Panasonic SF2B Series Instruction Manual preview
SF2B Series
Бренд: Panasonic Страницы: 30
ACE INSTRUMENTS WAVE Operating Manual preview
WAVE
Бренд: ACE INSTRUMENTS Страницы: 15
Wave Fitness Neptune Owner'S Manual preview
Neptune
Бренд: Wave Fitness Страницы: 15
QBC Diagnostics Star Operators & Service Manual preview
Star
Бренд: QBC Diagnostics Страницы: 65
Haki 564 User Manual preview
564
Бренд: Haki Страницы: 24
Dakota Digital VHX-66F-BRO Installation preview
VHX-66F-BRO
Бренд: Dakota Digital Страницы: 5
NCR 7709 Kit Instructions preview
7709
Бренд: NCR Страницы: 20
DARAY X740 Operating & Installation Manual preview
X740
Бренд: DARAY Страницы: 32
Darco Body Armor Night Splint Manual preview
Body Armor Night Splint
Бренд: Darco Страницы: 2
MacDon D65 Installation Instructions Manual preview
D65
Бренд: MacDon Страницы: 74
IEMCA KID 80 Manual For Use And Maintenance preview
KID 80
Бренд: IEMCA Страницы: 82
IEMCA KID 80-IV Touch Instruction Manual preview
KID 80-IV Touch
Бренд: IEMCA Страницы: 122
Calrec ARGO Installation & Technical Manual preview
ARGO
Бренд: Calrec Страницы: 92
V.ORLANDI RP10 Installation, Operating And Maintenance Instructions preview
RP10
Бренд: V.ORLANDI Страницы: 144
Vatech PAX-I User Manual preview
PAX-I
Бренд: Vatech Страницы: 137
Vatech EzRay Air W Installation Manual preview
EzRay Air W
Бренд: Vatech Страницы: 68
Varytec LED Derby ST User Manual preview
LED Derby ST
Бренд: Varytec Страницы: 52
Baileigh Industrial AP-0 Operating Instructions And Parts Manual preview
AP-0
Бренд: Baileigh Industrial Страницы: 12

Бренды по названию

Популярные бренды

Загрузить еще бренды