Fostex D-160 Скачать руководство пользователя

Страница: 2 / 196

D-160 Owner's Manual (Introduction)

CAUTION:

TO PREVENT ELECTRIC SHOCK, MATCH

WIDE BLADE OF PLUG TO WIDE SLOT, FULLY

INSERT.

ATTENTION:

POUR EVITER LES CHOCS ELECTRIQUES,

INTRODUIRE LA LAME LA PLUS LARGE DE LA

FICHE DANS LA BORNE CORRESPONDANTE

DE LA PRISE ET POUSSER JUSQU' AU FOND.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

Heat - The appliance should be situated away from heat

sources such as radiators, heat registers, stoves, or other

appliances (including amplifiers) that produce heat.

10. Power Sources - The appliance should be connected to a

power supply only of the type described in the operating

instructions or as marked on the appliance.

11. Grounding or Polarization - The precautions that should be

taken so that the grounding or polarization means of an

appliance is not defeated.

12. Power Cord Protection - Power supply cords should be routed

so that they are not likely to be walked on or pinched by items

placed upon or against them, paying particular attention to

cords at plugs, convenience receptacles, and the point where

they exit from the appliance.

13. Cleaning - The appliance should be cleaned only as

recommended by the manufacturer.

14. Nonuse Periods - The power cord of the appliance should be

unplugged from the outlet when left unused for a long period

of time.

15. Object and Liquid Entry - Care should be taken so that objects

do not fall and liquids are not spilled into the enclosure through

openings.

16. Damage Requiring Service - The appliance should be serviced

by qualified service personnel when:

A. The power supply cord or the plug has been damaged; or

B. Objects have fallen, or liquid has been spilled into the

appliance; or

C. The appliance has been exposed to rain; or

D. The appliance does not appear to operate normally or

exhibits a marked change in performance; or

E. The appliance has been dropped, or the enclosure

damaged.

17. Servicing - The user should not attempt to service the

appliance beyond that described in the operating instructions.

All other servicing should be referred to qualified service

personnel.

"WARNING"

"TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,

DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE."

SAFETY INSTRUCTIONS

1. Read Instructions - All the safety and operating instructions

should be read before the appliance is operated.

2. Retain Instructions - The safety and operating instructions

should be retained for future reference.

3. Heed Warnings - All warnings on the appliance and in the

operating instructions should be adhered to.

4. Follow Instructions - All operating and use instructions should

be followed.

5. Water and Moisture - The appliance should not be used near

water - for example, near a bathtub, washbowl, kitchen sink,

laundry tub, in a wet basement, or near a swimming pool, and

the like.

6. Carts and Stands - The appliance should be used only with a

cart or stand that is recommended by the manufacturer.

An appliance and cart combination should be moved with care.

Quick stops, excessive force, and uneven surfaces may cause

the appliance and cart combination to overturn.

7. Wall or Ceiling Mounting - The appliance should be mounted to

a wall or ceiling only as recommended by the manufacturer.

8. Ventilation - The appliance should be situated so that its location

or position dose not interfere with its proper ventilation.

For example, the appliance should not be situated on a bed,

sofa, rug, or similar surface that may block the ventilation

openings; or, placed in a built-in installation, such as a bookcase

or cabinet that may impede the flow of air through the ventilation

openings.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

The exclamation point within an equilateral triangle is

intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in

the literature accompanying the appliance.

The lightning flash with arrowhead symbol, within an

equilateral triangle, is intended to alert the user to the

presence of uninsulated "dangerous voltage" within

the product's enclosure that may be of sufficient

magnitude to constitute a risk of electric shock to

persons.

Содержание D-160





































































































































































































Результаты поиска

Содержание D-160

Отзывы:

Похожие инструкции для D-160

Бренды по названию

Популярные бренды

Fostex D-160, Руководство пользователя

Результаты поиска

Содержание D-160

Отзывы:

Похожие инструкции для D-160

Бренды по названию

Популярные бренды