Model 8335 (TC/SYNC card) Owner's Manual
24
Setup of the First D-15
1
. Switch [
ON
] the front panel [
GPI
] switch.
2
. Switch [
ON
] the
event start mode
by the SETUP mode.
Select and setup either "
001 (oncE)
" or "
002 (EVEry)
" by the SETUP menu
"
405 -***
." Simultaneous with setup of the SETUP menu "
405 -***
" to either
one of these, [
REF
] will blink in the display to indicate that the
event start
mode is [ON]
.
<NOTE>
When "001 (oncE)" is selected by the SETUP menu "405-***," event start is
executed once and simultaneously switch to "000" (OFF) and [REF] will be
extinguished. When power is switched off, the setup content will not be held
but switch to "000" (OFF).
Refer to page [13] for details on setup of SETUP menu "405-***."
3
. Set recording to head of playback.
4
. Press the [
INSTANT START
] key to switch [ON] the INSTANT START mode.
INSTANT START can then be executed from head of recording.
Setup of the 2nd D-15
1
. Switch [
ON
] the front panel [
GPI
] switch.
2
. Switch [
ON
] the INSTANT START mode.
3
. Set the external clock to "
503-000 (AES/EBU)
" by the SETUP menu "
503-***
."
4
. Set recording to head of playback.
Refer to page [15] for details on the SETUP menu "503-***."
Setup of Memory [00]
The time figure identical to the reference time code from which event is to
be started is edited and stored in memory [00] of the first D-15.
Although memory [00] is setup using by the same procedure as for executing
the AUTO REC mode, it can also be set by TC time in addition to A-TIME by
installing 8335. In order to setup by A-TIME, change the display to A-TIME
and if TC time is to be setup, change to the TC display.
Refer to [AUTO REC mode] of the D-15 Owners Manual for setup method of memory [00].