Model 8335 (TC/SYNC card) Owner's Manual
20
Settings Prior to Operation
Setup the following items prior to actual operation.
1
. Set the D-15 front panel [
CLOCK
] switch to [EXT].
2
. Set the 8335 external clock to match that of the master.
[
EXT CLOCK
] will be shown in the display.
Set the external clock by the SETUP menu "
503-***
."
Refer to page [15] on setup of the SETUP menu "503-***."
3
. Setup
CHASE mode
of 8335.
Select and setup the CHASE operation mode suitable for your application
from among "
501 -000 (ONCE)
," "
501 -001 (CONTINUE)
" or "
501 -002 (FRAME)
"
in the SETUP menu "
501 -***
."
Refer to page [14] on setup of the SETUP menu "501-***."
4
. Setup
LOCK WINDOW
when "
501 -001 (CONT)
" or "
501 -002 (FrAME)
" is selected
for the CHASE mode.
Setup the reference frame by the SETUP menu "
502 -***
" to determine the
UNLOCK state after entering the CHASE LOCK mode.
Refer to page [14] on setup of the SETUP menu "502-***."
5
. Setup the
CHASE OFFSET
figure.
If the
CHASE OFFSET
figure is randomly set, the D-15 will chase by
maintaining the interval for the time setup by CHASE OFFSET.
CHASE OFFSET can be setup with the OFFSET data edit mode by pressing
the D-15 front panel [
OFFSET
] key, then the [
QUIT/RCL
] key.
Refer to page [26] for details on editing the OFFSET figure.
Executing CHASE SYNC
After finishing the previous "
Settings Prior to Operation
," chase sync is
executed.
1
. Start playback of the master machine (VTR in this case).
2
. Switch on the D-15 front panel [
CHASE
] key (CHASE LED blinks).
By using the playback time code of D-15 (slave), it will start playback in
chase lock with the master machine time code.
When the slave machine is chase locked to the master machine, [
CHASE
LOCK
] will appear in the display and, at the same time, CHASE LED will
change from blinking to constant lighting.
3
. To stop the chase operation, press the [
CHASE
] key again (CHASE LED will
be extinguished).
