Foster SLIMLINE FSL400, Оригинальное сервисное руководство

Страница: 8 / 28

English
7
Power Supply Measurement Range
230Vac±10%, 50/60Hz, 3W -50…120°C, -55…240°F
-50 / -9.9…19.9 / 80°C (NTC 10K Only)
Relay Output Max Load (230Vac) Measurement Accuracy
Compressor – 16(8) A 240Vac <0.5°C within the measurement range
Defrost - 16(4) A 240Vac Operating Conditions
Evap. Fan - 16(4) A 240Vac -10 … +50°C; 15% … 80% r.H
Auxiliary Loads 1 - 8(2) A 240Vac
Controller Approvals
Input – NTC 10KΩ @ 25°C EN60730-1; EN60730-2-9
EN55022 (Class B)
EN50082-1
FD2-10 Technical Data
Configuration of Parameters
Parameters should not be changed unless you have an understanding of their purpose and the following
instructions are fully understood.
>
To gain access to the parameters access the configuration menu by pressing + together for
5 seconds.
>
The first parameter will show on the display.
>
Using the and or buttons select the required parameter.
>
Press the i button to display its current value.
>
While keeping pressed, use the and or buttons to set the new desired value.
>
On releasing i the new value will be stored and the next parameter will display.
>
To exit this mode or revert to normal operating mode, press or wait for 30 seconds.
If at any point no buttons are pressed for 30 seconds, without saving a new value, the display will return to the
standard temperature display.
Parameter Range Decription Foster FD2-10
SCL
Readout Scale:
2⁰C
1oC Range -50/-9.9 …. 19.9/80oC (with INP = SN4 only)
2oC Range -5⁰ …. 120oC
oF Range -55 …. 240oF
SPL -50 … SPH Minimum limit for SP setting. 1
SPH SPL … 120o Maximum limit for SP setting. 3
SP SPL … SPH Temperature setpoint to be achieved. 2
FD2-10 Controller Default Parameter Values & Descriptions