Foster SLIMLINE FSL400, Оригинальное сервисное руководство

Страница: 11 / 28

English
10
ALR -12 … 0o
Low temperature alarm differential.
-5
(With ALR = 0 the low temperature alarm is excluded).
AHR 0 … 12o
High temperature alarm differential.
5
(With AHR = 0 the low temperature alarm is excluded).
ATI
Alarm probe:
T1 T1 Air temperature probe used for alarm detection.
T2 Evaporator temperature probe used for alarm detection.
ATD 0 … 120 min Delay before alarm temperature warning. 90
ADO 0 … 30 min Delay before door open alarm warning. 8
AHM
Operation in case of high condenser alarm (T2 = CND):
NON
NON High condenser temperature alarm inhibited.
ALR Condenser warning - 'HC' displayed, alarm sounds.
STP As 'ALR' with compressor stopped and defrosts suspended.
AHT -50 … 120o Condenser alarm temperature (T2 = CND). 65
ACC 0 … 52 weeks
Condenser cleaning period.
0
(With ACC = 0 condenser cleaning is disabled).
IISM
Switchover method to second parameter set:
HDD
NON Second parameter set is excluded.
MAN Second parameter set is activated / deactivated by button 'M'.
HDD Second parameter activated by 'heavy' usage.
DI2 Second parameter set activated by DI2 input (DI2 = IISM).
IISL -50 … IISH Minimum limit for IISP setting. 1
IISH IISL … 120o Maximum limit for IISP setting. 1
IISP IISP … IISH Temperature setpoint to be achieved in 'Mode 2'. 1
IIHY 1 … 10o Off / On thermostat differential in 'Mode 2'. 3
IIFC
Evaporator fan mode during 'Mode 2' thermostatic control:
NON
NON Fan(s) run continuously.
TMP
Temperature based control. When compressor is on, fans are
on. When compressor is off, fans run as long as temperature
difference Te-Ta > FDT. Fans on again with FDH.
TIM
Time based control. When compressor is on, fans are on.
When compressor is off, fans in accordance to parameters
FT1, FT2 and FT3.