JSC FORTEZA FORTEZA TRIBO-M
Please visit our internet sites:
Page 42
6.6.2.
Setting the system sensitivity for HF
BE CAREFUL USING HF – because signal is generated from fence vibration. It can be fence
vibration as result of influence of cars, trains, moving near the fence. Before you use HF, you need to
check influences, that may affect a protected fence.
Select
Input 1
Detection parameters
Check frequency parameter which you want to adjust.
Detection parameters
–
Penetration threshold
–
HF
(high frequency adjustment mode), high frequency used to secure from cutting, smashing a fence.
Status parameters
Check
INPUT state: Status parameters
-
Current state:
Check
Averaged signal HF band:
shows a signal from the sensitive element which registries the processing
unit. The signal is not stable changing, in our condition it is about 73 mkV .
