JSC FORTEZA FORTEZA TRIBO-M
Please visit our internet sites:
Page 34
6.3.
Setting the COM port
For configuration of the COM-port choose “Configuration” - “COM-port” in the “Common” chapter.
By pressing of the „Detect” button the program finds all the COM-ports of the PC. Parameters of the
chosen COM-port may be set in the “Port settings” part.
The default Rate (bit/s) for the Forteza “Tribo-m” is 115200 bit/s – this speed has to be chosen in the
Rate (bit/s) field.
Press „Start” to open the chosen COM-port. If the “Active address”, „COM-port” and „Rate (bit/s)”
fields are filled in properly, the following windows appear on the status-panel: „Frames in Tx Buf”, „Bytes in
Rx Buf”. If this does not happen, check the connection between the Forteza “Tribo-m” central unit and the PC,
and whether the parameters are given properly.
