Fortec Star conga-PA3 Pico-ITX SBC Скачать руководство пользователя страница 72

Страница: 72 / 83

2015

congatec

PA3Cm11

71/81

Feature

Options

Description

Boot Option Filter

UEFI and Legacy

Legacy Only

UEFI Only

Control which devices and boot loaders the system should boot to.

Network

Do not launch

UEFI only

Legacy only

Control the execution of UEFI and legacy network option ROMs.

Storage

Do not launch

UEFI only

Legacy only

Control the execution of UEFI and legacy storage option ROMs.

Video

Do not launch
UEFI only

Legacy only

Control the execution of UEFI and legacy video option ROMs

Other PCI Devices

UEFI only

Legacy only

Control the execution of UEFI and legacy option ROMs for PCI devices different to network, video and storage.

8.4.27

SDIO Submenu

Feature

Options

Description

SDIO Access Mode

Auto

DMA
PIO

Control the SDIO access mode to the device.

8.4.28

USB Submenu

Feature

Options

Description

USB Module Version

No option

Displays the version of the USB module.

USB Devices

No option

Displays the detected USB devices.

Legacy USB Support

Enabled

Disabled
Auto

Enables Legacy USB support. AUTO option disables legacy support if no USB devices are connected. DISABLE
option will keep USB devices available only for EFI applications.

xHCI Hand-off

Enabled

Disabled

This feature can be used as a workaround for operating systems without xHCI hand-off support.

Note:

If this feature is enabled, the xHCI ownership change should be claimed by the xHCI operating system driver.

EHCI Hand-off

Disabled

Enabled

This feature can be used as a workaround for operating systems without EHCI hand-off support.

Note:

If this feature is enabled, the EHCI ownership change should be claimed by the EHCI operating system driver.

USB Mass Storage Driver
Support

Disabled

Enabled

Enable or disable mass storage driver support.

Содержание conga-PA3 Pico-ITX SBC

















































































Результаты поиска

Содержание conga-PA3 Pico-ITX SBC

Отзывы:

Похожие инструкции для conga-PA3 Pico-ITX SBC

Бренды по названию

Популярные бренды

Fortec Star conga-PA3 Pico-ITX SBC, Руководство пользователя

Результаты поиска

Содержание conga-PA3 Pico-ITX SBC

Отзывы:

Похожие инструкции для conga-PA3 Pico-ITX SBC

Бренды по названию

Популярные бренды