Copyright
©
2015
congatec
AG
PA3Cm11
51/81
8.4.1
Watchdog Submenu
Feature
Options
Description
POST Watchdog
Disabled
30sec
1min
2min
5min
10min
30min
Select the timeout value for the POST watchdog. The watchdog is only active during the system POST and provides a
facility to prevent errors during boot up by performing a reset.
Stop Watchdog for
User Interaction
No
Yes
Select whether the POST watchdog should be stopped during the popup of the boot selection menu or while waiting
for setup password insertion.
Runtime Watchdog
Disabled
One-time Trigger
Single Event
Repeated Event
Select the operating mode of the runtime watchdog:
‘One-time Trigger’ – Disables watchdog after first trigger.
‘Single Event’ – Executes every stage only once before the watchdog is disabled.
‘Repeated Event’ – Executes last stage repeatedly until reset.
Note:
This watchdog will be initialized just before the operating system starts booting.
Delay
Disabled
10sec
30sec
1min
2min
5min
10min
30min
Select delay time before runtime watchdog is activated. This ensures that the operating system has enough time to
load.
Event 1
ACPI Event
Reset
Power Button
Select the type of event that will be generated when timeout 1 is reached.
Event 2
Disabled
ACPI Event
Reset
Power Button
Select the type of event that will be generated when timeout 2 is reached.
Event 3
Disabled
ACPI Event
Reset
Power Button
Select the type of event that will be generated when timeout 3 is reached.
