manualshive.com logo in svg

Fortec Star conga-PA3 Pico-ITX SBC, Руководство пользователя

Поделиться
Скачать
Fortec Star conga-PA3 Pico-ITX SBC Скачать руководство пользователя страница 78

Copyright 

© 

2015 

congatec 

AG 

 

      PA3Cm11 

       

77/81

8.6 

Boot Setup

Select the Boot tab from the setup menu to enter the Boot setup screen. 

8.6.1 

Boot Settings Configuration

Feature

Options

Description

Setup Prompt Timeout

0 – 65535

Enter number of seconds to wait for setup activation key. Default: 1

Note:

 0 is not recommended. 65535 means infinite wait.

Bootup NumLock State

On

Off

Select the keyboard numlock state.

Quiet Boot

Disabled

Enabled

'Disabled' –

 Displays normal POST diagnostic messages.

'Enabled'

 – Displays OEM logo instead of POST messages. 

The default OEM logo is a dark screen.

Enter Setup If No Boot 
Device

No

Yes

Select whether the setup menu should be started if no boot device is connected.

Enable Popup Boot 
Menu

No

Yes

Select whether the popup boot menu can be started.

Boot Priority Selection

Device Based

Type Based

Select between device and type based boot priority lists:
'Device Based' – Select boot priority from a list of currently detected devices.
'Type Based' – Select boot priority from a list of device types even if they are not connected yet.

Power Loss Control

Remain Off

Turn On
Last State

Select the mode of operation if an AC power loss occurs:

'Remain Off' – 

Keeps the power off until the power button is pressed.

'Turn On' –

 Restores power to the computer.

'Last State' –

 Restores the previous power state before power loss occurred.

Note: 

Only works with an ATX type power supply.

AT Shutdown Mode

System Reboot

Hot S5

Select the behavior of an AT-powered system after a shutdown.

Battery Support

Auto (Battery Manager)

Battery-Only On I2C Bus
Battery-Only On I2C Bus

Select the battery system support bus.

System Off Mode

G3/Mech Off

S5/Soft Off

Select system state after shutdown if a battery system is present.

Fast Boot

Disabled

Enabled

Enable to boot with a minimum set of devices. No effect for BBS / legacy boot options.

 

Note

The term 'AC power loss' stands for the state when the module looses the standby voltage on the 5V_SB pins. The standby voltage is 
continuously monitored after the system is turned off. If the standby voltage is not detected within 30 seconds, this is considered an AC power 
loss condition. If the standby voltage remains stable for 30 seconds, it is assumed that the system was switched off properly.

Содержание conga-PA3 Pico-ITX SBC




















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды