manualshive.com logo in svg

formlabs Fuse 1, Руководство пользователя

Поделиться
Скачать
formlabs Fuse 1 Скачать руководство пользователя страница 52

50

12. Pull the swab across the upper laser window in a single direction to clean the surface. 

Repeat this multiple times, making sure to cover the full width and length of the upper laser 
window while wiping in a single direction.

13. Wait five minutes for the ethanol to evaporate before 

inspecting the upper laser window or reinstalling the 
optical cassette. 

14. Using the telescoping mirror, visually verify the upper 

laser window is clean and clear of obstruction. If 
there are streaks or debris on the upper laser 
window, repeat this cleaning procedure with a new 
polyester cloth swab.

15. Loosen the thumb screw in the front-center of 

the ceiling of the print enclosure. The optical tray 
drops down.

16. Return a clean optical cassette to the cassette tray.
17. Return the cassette tray to its closed position and tighten the thumb screw until it fully 

engages. 

18. Close the print enclosure door. Press firmly to ensure that the door is fully latched. If necessary, 

squeeze the door shut using the cutout on the right side of the printer for leverage. 

Содержание Fuse 1

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды