formlabs Fuse 1, Руководство пользователя

Страница: 19 / 64

Safety | 17
In case of powder inhalation, swallowing, or contact with eyes, follow these
instructions:
• AFTER INHALATION: If inhaled, remove person to fresh air and place in a position
comfortable for breathing. Keep person at rest. If breathing is difficult, administer
oxygen. If breathing has stopped, provide artificial respiration. If symptoms develop
or persist, seek medical advice/attention.
• AFTER SKIN CONTACT: Remove contaminated clothing and shoes. Rinse
skin with copious amounts of water [shower] for several minutes. Launder
contaminated clothing before reuse. If symptoms develop or persist, seek
medical advice/attention.
• AFTER SWALLOWING: If swallowed, DO NOT induce vomiting unless told to do
so by a physician or poison control center. Rinse mouth with water. Never give
anything by mouth to an unconscious person. If spontaneous vomiting occurs,
place on the left side with head down to prevent aspiration of liquid into the lungs.
If symptoms develop or persist, seek medical advice/attention.
Consult the safety data sheet (SDS) as the primary source of information to
understand safety and handling of Formlabs powders. Respect Formlabs powder
like any household chemical. Follow standard chemical safety procedures and
Formlabs powder handling instructions. In general, Formlabs powder is not
approved for use with food, drink, or medical applications on the human body. Refer
to the safety data sheet (SDS) for each specific powder as well as support.formlabs.
com for more detail.
3.1.4 Radio interference
Note: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated
in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference, in which case the
user will be required to correct the interference at their own expense.
Changes or modifications to this product not authorized by Formlabs could void the
electromagnetic compatibility (EMC) and wireless compliance and negate your authority to
operate the product.
This product has demonstrated EMC compliance under conditions that included the use
of compliant peripheral devices and shielded cables between system components. It is
important that you use compliant peripheral devices and shielded cables between system
components to reduce the possibility of causing interference to radios, televisions, and other
electronic devices.
WARNING
NOTICE