formlabs Fuse 1 Скачать руководство пользователя страница 14

Страница: 14 / 64

2.3.6

Additional Fuse 1 package components

Power cable:

Compatible with both the Fuse 1 and the Fuse Sift.

Stand:

Freestanding platform for the Fuse 1.

Optical cassette:

A set of gasketed windows that protect the laser and camera. Each Fuse

1 includes an optical cassette packaged with the printer.

Build chamber:

The compartment in which powder is deposited and sintered into parts.

Thermal-insulated silicone gloves:

For removing the build chamber while it’s still hot.

Push-top dispensers:

For dispensing Alconox, deionized water, and ethanol to clean the

optical cassette.

Polyester swabs:

For cleaning the upper laser window, the IR sensor and the IR

sensor housing.

PEC*PADs:

For cleaning the cassette’s optical windows.

Telescoping mirror:

For inspecting the upper laser window and roof of the print enclosure.

Lifting straps:

For two individuals to lift and move the Fuse 1.

2
3

4
5
6

8
9

Содержание Fuse 1

































































Результаты поиска

Содержание Fuse 1

Отзывы:

Бренды по названию

Популярные бренды

formlabs Fuse 1, Руководство пользователя

Результаты поиска

Содержание Fuse 1

Отзывы:

Бренды по названию

Популярные бренды