Formica Intentek Скачать руководство пользователя страница 4

Formica Group Technical Guide

   |   4

FTB-0918  |  Rev 2  |  6/20

TECHINCAL GUIDE USE & CARE, WARRANTY, AND INSTALLATON GUIDE 

INTENTEK

™ 

WIRELESS CHARGING SURFACE 

SCRATCH AND IMPACT PROTECTION OF THE 

DECORATIVE SURFACE

The decorative surface is resistant to scratches and impacts under 
normal use and cleaning conditions. However:
•  Heavy blows may crack or gouge the surface.
•  Sharp or abrasive objects and unglazed ceramics materials may 
 

slice, scratch or cause premature wear on the surface. 

•  Abrasive pads, scouring powders or cleaners may 
 

permanently dull and scratch the decorative surface.

HOT OBJECTS

Hot objects, such as cookware, irons, hot appliances, cigarettes, 
etc. should not be placed directly on decorative surfaces. Use a 
trivet, insulated hot pad or other protective device beneath all hot 
cookware, heat generated appliances or other heated objects.

Prolonged exposure to temperatures of 140°F (60°C) or higher may 
cause the laminate to separate from the core material. Intentek

 

Laminate surfacing material can withstand heat up to 275°F (135°C) 
for short periods of time. 

ORDINARY CLEANING OF THE DECORATIVE SURFACE

Decorative surface may be cleaned with a damp cloth and mild 
detergent. Use of abrasive cleaners, powders, scouring pads, steel 

wool, or sandpaper can damage the finish of the decorative surface. 

Acid, or alkaline-based cleaners and/or compounds will mar, etch, 
corrode, and permanently discolor the melamine decorative surface.

Do not use these cleaning materials on decorative laminate, nor 
allow bottles and/or rags contaminated with acid or alkaline–based 
cleaners/compounds to contact the surface. Accidental spills or 

splatters from these harsh materials should be wiped off immediately, 

and the area cleaned with a damp cloth.

Examples of cleaners containing acid, or alkali include, but are not 
limited to:
•  ceramic cooktop cleaners 
•  oven cleaners
•  rust removers

•  coffeepot cleaners 

•  drain cleaners 
•  lime scale removers
•  toilet bowl cleaners
•  metal cleaners
•  tub and tile cleaners

If in doubt about the suitability of a particular cleaner or detergent, 
check with its manufacturer.

Additional Special Cleaning information can be found in the

 Formica

®

 

Brand Laminate Use and Care Guide available on Formica.com

DISINFECTING RECOMMENDATIONS

 

The following branded cleaners and disinfectants are approved 
for Intentek

 when used according to recommended guidelines.  

The products are grouped by active ingredient type. All 

products on these lists meet the EPA’s criteria for use against 
SARS-CoV-2, the virus that causes COVID-19. To avoid 
surface damage or discoloration, wipe the surface clean to 

avoid leaving disinfecting liquid open on the surface. It is also 

recommended to follow disinfecting with a warm water wash 
using a soft cloth and then dry the surface. Always follow the 
manufacturers’ guidelines and safety precautions for these 
products. 

For EPA updates on the current List N and Frequently 
Asked Questions about disinfectants related to coronavirus 
visit:

https://www.epa.gov/pesticide-registration/list-n-disinfectants-
use-against-sars-cov-2

QUATERNARY AMMONIUM

Clorox

®

 Disinfecting Wipes

Clorox Healthcare

®

 VersaSure

®

 Wipes

Lysol

®

 Brand All Purpose Cleaner

Lysol

®

 Kitchen Pro Antibacterial Cleaner

Virex

 II 

Fantastik

®

 Multi-Surface Disinfectant Degreaser

Maquats

®

QUATERNARY AMMONIUM: ISOPROPANOL

Super Sani-Cloth

®

 Germicidal Disposable Wipe

Cavicide

 Wipes

Sani-Prime

®

 Germicidal Spray

Opti-Cide3

®

 Wipes

ISOPROPANOL, IPA, RUBBING ALCOHOL

,

SODIUM HYPOCHLORITE (BLEACH) 

Clorox Healthcare

®

 Bleach Germicidal Wipes

Clorox

®

 Brand Regular Bleach

Sani-Cloth

®

 Bleach Germicidal Wipe

Caviwipes

 Bleach

Dispatch

®

Lysol

®

 Brand Bleach Mold/Mildew Remover

All related brands containing bleach

HYDROGEN PEROXIDE

Clorox

®

 Commercial Solutions

®

 Hydrogen Peroxide Disinfectant 

and wipes

Содержание Intentek


















Отзывы: