Formica Group Technical Guide
| 15
FTB-0918 | Rev 2 | 6/20
TECHINCAL GUIDE USE & CARE, WARRANTY, AND INSTALLATON GUIDE
INTENTEK
™
WIRELESS CHARGING SURFACE
LIFETIME EXPECTANCY TESTING
The electronic module has undergone accelerated life testing to
simulate seven years of continuous use. Lifetime Expectancy is not
equivalent to warranty. See Warranty Section within this guide for
additional details.
FCC COMPLIANCE STATEMENT
This device complies with Part 18 of the FCC Rules Warning:
Changes or modifications to this unit not expressly approved by the
party responsible for the compliance could void the user’s authority
to operate the equipment. Note: This equipment has been tested
and found to comply with the limits for ISM equipment, pursuant
to Part 18 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential/
commercial installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or and experienced radio/TV technician for
help.
The user is cautioned that changes and modifications made to the
equipment without the approval of manufacturer could void the user’s
authority to operate this equipment.
• The operating Frequency band(s): 111.920kHz
• “Hereby, Formica Group declares that the radio equipment type
Wireless Power Charge is in compliance with Directive
2014/53/EU. The full text of the EU declaration of conformity
is available at the following URL:
https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0053
• No restriction for EU countries.
• This equipment complies with radiation exposure limit set forth
for an uncontrolled environment. This equipment should be
installed and operated with minimum distance 20 cm between
the radiator and your body.
UL STANDARDS
The AC adapter has been TUV Rheinland Listed for testing to the
UL 60950-1. The TUV Listed mark will be on the AC adapter. The
Electronics Module has been ETL Listed for testing to the UL2738.
An ETL Listed mark will be found on the Electronics Module.
LEGAL TERMS AND CONDITIONS OF USE
INTELLECTUAL PROPERTY AND CONFIDENTIALITY
This Intentek
™
Wireless Charging Surfaces Guide contains proprietary
and confidential intellectual property owned by Formica Group. The
information in this Guide is provided solely to assist in using the
Intentek
™
System and may not be disclosed or used for any other
purpose.
WARRANTY
INTENTEK
™
WIRELESS CHARGING SURFACES
LIMITED WARRANTY
1. Limited Warranty.
The Intentek
™
Wireless Charging Surface
consists of Intentek
™
laminate, laminate backer, electronics module
and power cord. FORMICA warrants to the Buyer to which FORMICA
has sold its Intentek
™
Wireless Charging Surface (the “Buyer”), that
for a period of (1) one year from the date of first sale, this product will
be of merchantable quality, reasonably free of defects in materials
and workmanship, manufactured in accordance with applicable
Qi standards, and that when properly stored, handled, fabricated
and installed, will conform, within accepted tolerance, to the
specifications stated in the Material Properties Datasheet published
on the date of delivery at www.Formica.com. Only the limited
warranty published at www.Formica.com as of the date of initial
shipment of the Intentek
™
Wireless Charging Surface to the Buyer
shall be applicable and effective.
2. Remedy.
In the event that an Intentek
™
Wireless Charging
Surface fails to conform to this limited warranty, FORMICA shall, at
its sole option and discretion, either repair the defective Intentek
™
Wireless Charging Surface or furnish replacement Intentek
™
Wireless
Charging Surface. The period of limited warranty applicable to a
repaired or replaced Intentek
™
Wireless Charging Surface shall
be the remainder of the unexpired period of this limited warranty.
If FORMICA chooses to repair the defective Intentek
™
Wireless
Charging Surface, FORMICA or its agent must be allowed to make
the repair. If FORMICA chooses to supply new Intentek
™
Wireless
Charging Surface, FORMICA is only obliged to supply Intentek
™
Wireless Charging Surface that matches the color of the product
originally supplied as closely as possible and is not obliged to supply
an identical color.
3. Limited Warranty Conditions.
This limited warranty shall be null
and void and/or shall be deemed revoked upon any failure to fully
adhere to any of the following conditions:
1. the Buyer has paid the price of the Intentek
™
Wireless
Charging Surface in full and has complied with all its
(payment) obligations to FORMICA;
2. the Intentek
™
Wireless Charging Surface shall have
been installed to meet all applicable codes and standards,
laws and regulations;
3. the storage, transport, processing, application,
fabrication, installation and/or maintenance instructions for