Formica Group Technical Guide
| 11
FTB-0918 | Rev 2 | 6/20
TECHINCAL GUIDE USE & CARE, WARRANTY, AND INSTALLATON GUIDE
INTENTEK
™
WIRELESS CHARGING SURFACE
5. ELECTRONICS INSTALLATION (CONTINUED)
5G) ALIGN ELECTRONICS HOUSING:
Visually align the screw
holes in the electronics housing over the holes in the heat sink and
use as a guide when dropping in the housing. Be careful not to stress
pogo pins.
3" screws can be used to help with alignment. Thread 3" alignment
screws into housing system in opposite corners to use as guides to
drop housing system in. This will help protect pogo pins. Remove
alignment screws before proceeding to next step.
5H) ATTACH ELECTRONICS HOUSING:
Press and attach
electronics module housing to heat sink.
5I) SCREW IN HOUSING:
Use four screws to secure housing to
heat sink.
5J) CONNECT ADAPTER:
Connect AC Adapter into the master
module.
5K) COVER WIRES AS NEEDED:
Place protective sheathing cover
over exposed wires as needed.
5L) PLUG IN:
Plug AC Adapter into a compatible mains outlet
5M) CONFIRM CORRECT INSTALLATION:
Complete quality
check (see below)
6. FINISH ASSEMBLY
6A) FINISH FURNITURE BASE:
Install support leg(s) per the
component design