![background image](http://html1.mh-extra.com/html/formax/cut-true-29h/cut-true-29h_operators-manual_2320002050.webp)
Page
50
/
62
8.4 Adjusting the parallelism of back gauge
Depending on the required inclination of back gauge, its adjustment should be carried out using
drawings 40 and 41,
Drawing. 40 Method for removing the cover
To adjust back gauge:
8.4.1 unscrew the screws 1 (fig.40)
8.4.2 remove the cover 2 (fig.40)
8.4.3 loosen the screws 1 (fig.41)
8.4.4 loosen the nuts 2 (fig.41)
8.4.5 by turning the screws 3, place the approaching beam 4 (Fig. 41) at the right angle
8.4.6 lock the adjustment screws with 3 nuts 2 (fig.41)
8.4.7 firmly tighten the screws 1 (fig.41)
After the cutting attempt, repeat the adjustment until the parallel cutting is achieved.
Содержание Cut-True 29H
Страница 1: ...Cut True 29H Hydraulic Guillotine Paper Cutter OPERATOR MANUAL Second Edition 1 2019...
Страница 14: ...Page 14 62 Figure 8...
Страница 37: ...Page 37 62 Figure 24 Figure 25...
Страница 51: ...Page 51 62 Figure 41 Adjusting elements of back gauge...