![background image](http://html1.mh-extra.com/html/formax/cut-true-29h/cut-true-29h_operators-manual_2320002052.webp)
Page
52
/
62
9. MAINTENANCE
Danger
Maintenance and lubrication work should be carried out after turning off the
machine (main switch in position "0")
9.1 Daily maintenance
Every day, remove all waste from the cutter and the operator's working space.
9.2 Treatments that should be performed periodically
At regular intervals, waste and dirt should be removed from hard to reach machine and
surrounding areas:
• Regularly remove paper waste from the press and knife drive holes
• Air intakes for motors must be kept free of dust and debris.
Danger
Caution- fire hazard with insufficient ventilation.
The machine guards must be put back into place immediately after maintenance
has been completed!
9.3 Lubrication
The list of lubrication points is shown in Figures 44, 45, 46, 47, 48 and described in table 12.
Access to lubrication points is possible after removing the covers shown in Figs. 42, 43, 46, 48.
When lubricating the knife assembly, use the controls as when changing the knife (Chapter 8.1)
In places requiring lubrication with a grease, apply grease with a grease gun. It is enough to
press the trigger of the lubricator 2-3 times.
Содержание Cut-True 29H
Страница 1: ...Cut True 29H Hydraulic Guillotine Paper Cutter OPERATOR MANUAL Second Edition 1 2019...
Страница 14: ...Page 14 62 Figure 8...
Страница 37: ...Page 37 62 Figure 24 Figure 25...
Страница 51: ...Page 51 62 Figure 41 Adjusting elements of back gauge...