![background image](http://html1.mh-extra.com/html/formax/cut-true-29h/cut-true-29h_operators-manual_2320002049.webp)
Page
49
/
62
8.3.3 Use a 3-mm hexagonal key with 3 mm to firmly screw in the screws 3 (Fig. 39) in
the threaded holes in the clamping beam, causing the false clamp to be locked in the
clamping beam.
8.3.4 Release the pressure on the pedal 2 (Fig. 39) - the beam with the inserted cylinder
returns to the upper position
The removable false clamp must be attached under the front table!
(Fig. 38).
INFO
The lack of the insert in the place of attachment is treated by the programmer as if it was
mounted in the clamping beam and narrow cut (waste) is greater.
Mounting the insert into the pressure bar causes: the minimum narrow cut (waste) is
40mm (without insert 22mm), maximum stack height is 76mm (without 80mm insert).
Figure 39. Operating elements used when mounting the false clamp into the pressure bar
Содержание Cut-True 29H
Страница 1: ...Cut True 29H Hydraulic Guillotine Paper Cutter OPERATOR MANUAL Second Edition 1 2019...
Страница 14: ...Page 14 62 Figure 8...
Страница 37: ...Page 37 62 Figure 24 Figure 25...
Страница 51: ...Page 51 62 Figure 41 Adjusting elements of back gauge...