Table of contents
3QLCLM
Edition: 04/2014
4
1.0 General information about the documentation
1.1 General information
This operating manual contains the required information for the intended use of 3-jaw power chuck with
balancing of centrifugal force type 3QLCLM. The manual is meant for technically qualified persons.
Qualified persons are:
•
Persons, who are trained in handling of the power chuck as operating staff.
•
Persons, who as commissioning and service staff possess educational qualification
required for commissioning and repair.
The instructions in this operating manual must be read and understood completely for
the operation, maintenance and repair of the power chuck.
We reserve the right to make technical changes necessary to improve the power chuck which may
result in deviations from the illustrations and information contained in this manual. This operating
manual may not be reproduced or copied, either in full or in part, utilized for the purposes of competition.
FORKARDT DEUTSCHLAND GMBH retains the copyright for this operating
manual.
The operating manual, prepared based on DIN V 8418, must be read, understood and followed by the
responsible operating staff.
Important details for the use of power chuck are pointed out in this operating manual. Faults in the
power chucks can be prevented and a trouble-free operation can be guaranteed only with the
knowledge of this operating manual.
•
We would like to point out that we are not liable for damages and operational interruptions,
which may result from non-compliance of the operating manual.
•
Please contact our customer service department if you still have any difficulties and they will be
happy to help you. Customer service - see corresponding section.
•
This operating manual only refers to power chuck
Type 3QLCLM
•
We reserve the right to make technical changes necessary to improve the power chuck, Type
3QLCLM, which may result in deviations from the illustrations and information contained in this
manual.
