![Ford ENDURA 2017 Скачать руководство пользователя страница 36](http://html1.mh-extra.com/html/ford/endura-2017/endura-2017_owners-manual_2318212036.webp)
•
Various vehicle speed reminders can
be set. Warnings will be shown in the
display followed by an audible tone
when the set vehicle speed is
exceeded.
•
Audio system maximum volume of
45%. A message will be shown in the
display when you attempt to exceed
the limited volume. Automatic volume
control will be disabled.
•
Always on setting. When this is
selected, you will not be able to turn
off AdvanceTrac or traction control,
Emergency Assistance, or the Do Not
Disturb feature (if your vehicle is
equipped with these features).
CREATING A MYKEY
Use the information display to create a
MyKey:
1.
Insert the key you want to program into
the ignition. If your vehicle is equipped
with a push-button start, place the
intelligent access transmitter into the
backup position. The location of your
backup position is in another chapter.
See
2. Switch the vehicle on.
3. Access the main menu in the
information display and then scroll
through the menus to change the
settings of your MyKey. From the
MyKey menu select the option Create
MyKey.
4. When prompted, hold the
OK
button
until you see a message informing you
to label this key as a MyKey. The
programmed restrictions apply when
you key off, open and close the driver
door and restart your vehicle with the
programmed key or transmitter.
MyKey is successfully created. Make sure
you label it so you can distinguish it from
the admin keys.
You can also program configurable
settings for the key(s). See
Programming/Changing Configurable
Settings
.
Programming/Changing
Configurable Settings
Use the information display to access your
configurable MyKey settings by doing the
following:
1.
Switch the vehicle on using an admin
key.
2. Access the main menu in the
information display and then scroll
through the menus to change the
settings of your MyKey. See
3. Follow the instructions in the display.
The programmed restrictions apply when
you key off, open and close the driver door
and restart your vehicle with the
programmed key or transmitter.
Note:
You can clear or change your MyKey
settings at any time during the same key
cycle as you created the MyKey. Once you
have switched the vehicle off, however, you
will need an admin key to change or clear
MyKey settings.
Note:
When you make any changes to your
MyKey settings, you change the settings for
every MyKey. You cannot make individual
changes to apply to certain MyKeys.
CLEARING ALL MYKEYS
You can clear or change your MyKey
settings using the information display
control on the steering wheel. See
Switch the ignition on using an admin key.
33
Endura (CDQ) New Zealand, enNZL, Edition date: 201712, First Printing
MyKey™
Содержание ENDURA 2017
